- You do not have any products in your shopping cart yet.
Main page » Metal » sawing machine » ELMAG band saw » ELMAG SPECIAL 391 A CNC MACC metal band saw machine
ELMAG SPECIAL 391 A CNC MACC metal band saw machine
Product Highlights ELMAG SPECIAL 391 A CNC MACC metal band saw
HIGHLY EFFICIENT SERIES PRODUCTION
Clamping - Enter cutting dimension - Start. Automatic saws with feed are a standard for rational series processing of bar and bundle material. Due to the simple material handling, the automatic saws 315 and 380 pay off even for single cuts and small series. They are available with CNC1 single dimension control or with CNC9 program control.
CNC9 - SELECT AND START PROGRAM
The material is fed continuously with equal or variable cut-off lengths. Up to 9 cutting programs with 99 individual steps each are possible. The system stops automatically at the end of the bar or piece count. An excellent cutting solution for series with different cut-off lengths - ideal for cutting entire product groups. With the CNC9 control, CNC1 single dimension cutting is also possible at any time.
SIZES AND CUTTING QUALITY
The automatic saws 315 and 380 allow the processing of cutting sizes up to 280x210 or 320x290 mm. They have two speed levels. A continuously adjustable cutting speed regulator is available as an optional extra. All models are equipped with a cutting pressure control SDS to optimize the saw frame feed.
391 A CNC - CNC9, 320X290 MM
Fully automatic bandsaw for mitre cuts with material feeding, CNC1 single dimension control, cutting sizes up to 280x210 mm. Very high throughput capacity, two speed levels, one-sided mitre up to 60°. With modern control electronics, hydraulic power pack and components to control the material trolley, quick-action vice and saw frame functions. User-friendly control panel with cutting pressure control, membrane keys, operating and warning indicators.
MATERIAL FEED AND CUTTING CYCLE
The automatic saws are fed by means of a hydraulically driven material trolley with an attached quick-clamping vice. After entering the dimensions or selecting the program at the control and starting the cutting cycle, the bar or bundle material is fed to the cutting system with accurate dimensions and clamped to its quick-action vice. After the cutting process, the material carriage is automatically reset and the workpiece is released. The next cutting cycle follows. The fully automatic sequence can be interrupted and resumed at any time.
Clamping - Enter cutting dimension - Start. Automatic saws with feed are a standard for rational series processing of bar and bundle material. Due to the simple material handling, the automatic saws 315 and 380 pay off even for single cuts and small series. They are available with CNC1 single dimension control or with CNC9 program control.
CNC9 - SELECT AND START PROGRAM
The material is fed continuously with equal or variable cut-off lengths. Up to 9 cutting programs with 99 individual steps each are possible. The system stops automatically at the end of the bar or piece count. An excellent cutting solution for series with different cut-off lengths - ideal for cutting entire product groups. With the CNC9 control, CNC1 single dimension cutting is also possible at any time.
SIZES AND CUTTING QUALITY
The automatic saws 315 and 380 allow the processing of cutting sizes up to 280x210 or 320x290 mm. They have two speed levels. A continuously adjustable cutting speed regulator is available as an optional extra. All models are equipped with a cutting pressure control SDS to optimize the saw frame feed.
391 A CNC - CNC9, 320X290 MM
Fully automatic bandsaw for mitre cuts with material feeding, CNC1 single dimension control, cutting sizes up to 280x210 mm. Very high throughput capacity, two speed levels, one-sided mitre up to 60°. With modern control electronics, hydraulic power pack and components to control the material trolley, quick-action vice and saw frame functions. User-friendly control panel with cutting pressure control, membrane keys, operating and warning indicators.
MATERIAL FEED AND CUTTING CYCLE
The automatic saws are fed by means of a hydraulically driven material trolley with an attached quick-clamping vice. After entering the dimensions or selecting the program at the control and starting the cutting cycle, the bar or bundle material is fed to the cutting system with accurate dimensions and clamped to its quick-action vice. After the cutting process, the material carriage is automatically reset and the workpiece is released. The next cutting cycle follows. The fully automatic sequence can be interrupted and resumed at any time.
Typical applications ELMAG SPECIAL 391 A CNC MACC metal band saw machine
- Metal construction
- Mechanical Engineering
- Apparatus engineering
- Plant engineering
- Container construction
- Boiler construction
- Pipeline construction
- Heat exchanger construction
- Building construction
- Civil engineering
- Noise protection construction
- Mechanical Engineering
- Apparatus engineering
- Plant engineering
- Container construction
- Boiler construction
- Pipeline construction
- Heat exchanger construction
- Building construction
- Civil engineering
- Noise protection construction
Standard equipment ELMAG SPECIAL 391 A CNC MACC metal band saw machine
- V-Auto H Fully automatic hydraulic
- CNC9 program control
- Material support 1.5 m with rollers
- Material trolley with SSH/SSS
- Cooling system with electric pump
- Saw blade wheels with precision bearings
- Saw blade tracking
- SBÜ Saw blade monitoring Limit switch
- Saw blade guide adjustable at the front
- Tensioning bearing front/rear adjustable
- Chip scraper and chip brush
- Protection Guard with safety shutdown
- Saw blade guard with limit switch
- Sheet steel base with chip tray
- Band saw blade bimetal cobalt
- Tools/operating instructions/CE
- CNC9 program control
- Material support 1.5 m with rollers
- Material trolley with SSH/SSS
- Cooling system with electric pump
- Saw blade wheels with precision bearings
- Saw blade tracking
- SBÜ Saw blade monitoring Limit switch
- Saw blade guide adjustable at the front
- Tensioning bearing front/rear adjustable
- Chip scraper and chip brush
- Protection Guard with safety shutdown
- Saw blade guard with limit switch
- Sheet steel base with chip tray
- Band saw blade bimetal cobalt
- Tools/operating instructions/CE
Technical facts ELMAG SPECIAL 391 A CNC MACC metal band saw machine
- CNC9 program control
- Easy material feed - wide material support with three rollers, length 1.5 m
- Highest positioning accuracy - material carriage reference easily adjustable
- Material trolley feed max. 600 mm (longer strokes programmable)
- Fully automatic loading and cutting cycle from clamping to releasing the workpiece:
- Cycle start from control panel
- Material trolley before / feeding to size
- Fix material / clamp closed
- Saw blade drive on
- Coolant pump on / Lubricate
- Lowering the saw bow / cutting
- Material trolley back / Reference
- Lifting / resetting the saw bow
- Saw blade drive off
- Coolant pump off
- Release workpiece / open clamp
- Cycle repetition until end of bar or piece count or interruption
- Saw frame feed or cutting pressure infinitely variable - Cutting pressure control SDS with rotary control on the control panel
- Saw frame stroke limiter for setting the reset stroke
- Fast and precise material clamping - both SSS quick-action vices with handwheel for presetting the clamping path, with quick-action clamping
- Quick mitre adjustment 0-60° - with quick release angle clamp and angle scale
- Ideal for thick walls and solid material - powerful 900/1,600 W drive
- Smooth running and long service life - High-performance gear unit with oil bath for permanent lubrication
- cutting speeds 38 and 77 m/min
- Saw blade cooling system with electric pump, metering valve and return filter
- Smooth saw band run - ideally dimensioned saw band edges with precision bearings and track adjustment
- Simple saw blade change, permanent tension monitoring - with infinitely adjustable saw blade tensioner and limit switch SBÜ
- Tight, play-free saw blade guide - clamping bearing adjustable at the front towards the workpiece, precisely adjustable clamping bearing with eccentric axis
- Infinitely variable hydraulic lowering system (hydraulic cylinder on rear saw arm)
Technical data ELMAG SPECIAL 391 A CNC MACC metal band saw machine
- Cutting range max.: 320x290 mm
- saw blade length: 3.200 mm
- saw band height: 27 mm
- saw blade thickness: 0,9 mm
- cutting thickness: 1,2 mm
- Vise opening max.: 0-320 mm
- cutting angle: 0-60 °
- material trolley feed max.: 600 mm
- Speed steps: 2
- cutting speed: 1: 38 / 2: 77 m/min
- Saw blade drive Motor power: 1: 900 / 2: 1,600 W
- Coolant pump Engine power: 90 W
- Hydraulic pump Motor power: 750 W
- Power supply: 400 / 50-60 V/Hz
- Inlet height: 850 mm
- Length: 3,385 mm
- Width: 2,045 mm
- Height: 1,820 mm
- Weight: 960 kg
Highest quality of ELMAG machines
Benefit from a 2-year warranty from ELMAG
Accessories for ELMAG machines on request
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login