- You do not have any products in your shopping cart yet.
ELMAG PUMA S 2000 POWER welding inverter - SUPER SET
Product Highlights ELMAG PUMA S 2000 POWER welding inverter - SUPER SET
PUMA POWER S
The high-quality PUMA POWER INVERTERs supply continuously adjustable, clean welding current (DC) for MMA and TIG from the mains or power generator and process all common coated electrodes.
PUMA POWER INVERTER set
- Puma Power S 2000 Inverter
- Electrode holder with 4 m welding cable 25 mm² and DINSE plug 16/25 mm²
- Earth terminal with 3 m earth cable 25 mm² and DINSE plug 16/25 mm²
- Hand welding shield PVC including welding glass
- Slag Hammer
- Steel wire brush
- Set in plastic
- Transport case
- Operating instructions / CE
Materials
- Steel
- CrNi: Ø 1.6-4.0 mm
- Electrodes: Rutile (R), rutile basic (RB), basic (B), rutile cellulose (RC)
The high-quality PUMA POWER INVERTERs supply continuously adjustable, clean welding current (DC) for MMA and TIG from the mains or power generator and process all common coated electrodes.
PUMA POWER INVERTER set
- Puma Power S 2000 Inverter
- Electrode holder with 4 m welding cable 25 mm² and DINSE plug 16/25 mm²
- Earth terminal with 3 m earth cable 25 mm² and DINSE plug 16/25 mm²
- Hand welding shield PVC including welding glass
- Slag Hammer
- Steel wire brush
- Set in plastic
- Transport case
- Operating instructions / CE
Materials
- Steel
- CrNi: Ø 1.6-4.0 mm
- Electrodes: Rutile (R), rutile basic (RB), basic (B), rutile cellulose (RC)
Typical applications ELMAG PUMA S 2000 POWER welding inverter - SUPER SET
- Repair/assembly operations
- Hobby
- Do-it-yourselfers
- Outdoor / Offshore welding
- Agriculture
- Metal construction
- Hobby
- Do-it-yourselfers
- Outdoor / Offshore welding
- Agriculture
- Metal construction
Technical facts ELMAG PUMA S 2000 POWER welding inverter - SUPER SET
- Hand welding electrodes up to Ø 4.0 mm
- Compact direct current generator with inverter technology
- Welding current constant source with PFC (conforming to EN 61000 3 12)
- Excellent duty cycle values
- Energy saving, low open circuit voltage
- HOT START: Automatic ignition current increase
- ANTI STICK: Welding current reduction at short circuit
- Operating mode switch MMA/WIG
- LIFT TIG: Optimal TIG
- Ignition mode with low ignition current
- Powerful cooling fan with speed control
- Thermal overload protection with automatic reset
- GEN POWER: operation by means of a power generator, ideal for customer service / construction sites
- Power Controller for high current generator
- Compatibility, output voltage tolerance 185-275 Volt
Technical data ELMAG PUMA S 2000 POWER welding inverter - SUPER SET
- Welding current setting range: 10-180A
- 100 % duty cycle (10 min. at 40 °C) at welding current: 120A
- 60 % duty cycle (10 min at 40°C) at welding current: 140A
- Duty cycle (10 min at 40°C) at max. welding current: 10 / 180 % / A
- Mains connection / phases: 230 / 1V / ~
- Mains frequency: 50 / 60Hz
- Mains current tolerance: ± 20%.
- Mains fuse protection slow: 16AT
- Thermal overload protection: Yes
- Insulation class: H
- Protection class (IP): 23
- Input power l1 max. / l1 eff.: 25 / 15A
- DINSE Ground connection / cross section: 9 / 25Ø / mm²
- Connection plug: Schuko
- width: 170mm
- depth: 395mm
- height: 320mm
Highest quality of ELMAG machines
Benefit from a 2 year ELMAG warranty
Accessories for ELMAG machines on request
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login